Resin Overlay on Existing Surfaces in Hockley, Essex

Common Challenges

• Cracks telegraphing through thin overlays

  When anti-crack measures are omitted, hairline and structural cracks travel through the resin, causing splits and requiring rework within seasons.

• Dirty or oily concrete prevents bonding

  Contaminants, oil or loose dust stop primer adhesion. Poor surface prep leads to patchy bonding and premature overlay failure.

• Clay soils cause base movement on village homes

  Hockley clay subsoils expand and shrink seasonally; without correct excavation and MOT Type 1 sub-base compaction, overlays can crack and deform.

How We Help

• Lower replacement costs vs full dig-out

  Using priming, mesh and a thin resin layer over a sound base avoids full excavation, cutting labour and disposal on suitable drives.

• MOT Type 1 sub-base where needed

  Where tests show movement, we specify MOT Type 1 sub-base compacted to 95% density to resist clay shrink-swell and prevent future cracking.

• UV-stable colours for years

  UV-stable resin binders and lightfast pigments reduce fading, keeping colour consistent without frequent recoats or cosmetic repairs.

• Slip-resistant finish for safety

  Slip-resistant aggregate embedded in the resin binder improves wet-weather grip at thresholds and paths, meeting expected pedestrian safety needs.

• Quick site turnaround

  Power washing, priming and thin resin curing minimise on-site disruption compared with full re-builds, reducing time off-driveway.

• Lower replacement costs vs full dig-out

  Using priming, mesh and a thin resin layer over a sound base avoids full excavation, cutting labour and disposal on suitable drives.

• MOT Type 1 sub-base where needed

  Where tests show movement, we specify MOT Type 1 sub-base compacted to 95% density to resist clay shrink-swell and prevent future cracking.

• UV-stable colours for years

  UV-stable resin binders and lightfast pigments reduce fading, keeping colour consistent without frequent recoats or cosmetic repairs.

• Slip-resistant finish for safety

  Slip-resistant aggregate embedded in the resin binder improves wet-weather grip at thresholds and paths, meeting expected pedestrian safety needs.

• Quick site turnaround

  Power washing, priming and thin resin curing minimise on-site disruption compared with full re-builds, reducing time off-driveway.